Two-Phase Heat Transfer Research Laboratory
The Two-Phase Heat Transfer Research Laboratory in the Department of Mechanical Engineering at the National Institute of Technology Calicut is led by Dr. Sujith Kumar C S. The laboratory investigates boiling, quenching, and interfacial evaporation research for thermal management and clean water.
Led by Dr. Sujith Kumar C S (Associate Professor, Department of Mechanical Engineering, NIT Calicut), our laboratory explores flow and pool boiling, surface engineering for phase-change heat transfer, immersion quenching, and solar-driven interfacial evaporation.
The laboratory combines in-house boiling, quenching and desalination test rigs with high-speed imaging, infrared thermography, surface characterization and multiphase CFD to study phase-change heat transfer from the surface scale to the device scale. Sustained grant funding of ₹1.70 crore has been awarded by ISRO, SPARC, ANRF (SERB), DST, and the Kerala Directorate of Environment and Climate Change.
Sponsors & Granting Bodies
Funding Agencies & Partners
Advancing the Frontiers of Thermal & Fluid Physics
The laboratory combines in-house boiling, quenching and desalination test rigs with high-speed imaging, infrared thermography, surface characterization and multiphase CFD to study phase-change heat transfer from the surface scale to the device scale.
Thrust Areas
Boiling heat transfer, immersion quenching, electric-field-assisted boiling, solar desalination, and two-phase thermal management.
7 Projects
₹1.70 Crores in competitive sponsored funding from ISRO, SPARC, ANRF (SERB), DST, and DoECC Kerala.
Facilities
In-house boiling, quenching, and desalination test rigs, closed-loop spreaders, LabVIEW DAQ, and high-temp tubular furnace.
Output & Patents
42 SCI/SCIE publications (29 Q1 journals), 5 Indian patents granted, and international collaborations across 4 continents.
Core Research Areas
The laboratory combines in-house boiling, quenching and desalination test rigs with high-speed imaging, infrared thermography, surface characterization and multiphase CFD to study phase-change heat transfer from the surface scale to the device scale.
Boiling Heat Transfer & Surface Engineering
Enhancing pool and flow boiling with engineered surfaces: CNT and nanostructured coatings, porous and composite coatings, hybrid wettable patterns, and laser and electrical-discharge texturing.
Immersion Quenching & Leidenfrost Suppression
Faster, controlled cooling of hot metal parts by breaking up the vapour film using additives, nanoparticles, borated water and electric fields.
Electric-Field-Assisted Boiling
Static and alternating electric fields to control bubble dynamics, remove local hotspots and improve steam quality for concentrated solar power.
Solar Interfacial Evaporation & Desalination
Floating patterned absorbers, wicking structures, salt-rejecting evaporators, PCM storage and multi-stage stills for low-cost clean water.
Two-Phase Thermal Management
Wickless and electro-assisted heat spreaders, loop heat pipe wicks, CPV cooling and pumped liquid cooling loops for high-heat-flux electronics.
SPONSORED R&D PROJECTS
7 sponsored projects · ₹1.70 Crores · All PI: Dr. Sujith Kumar C S
| Sl. No. | Name of Project | Sponsoring Agency | Sanctioned | Start Date & Status | Technical Outcome |
|---|---|---|---|---|---|
| 1 | MEMS Based Pumped Liquid Cooling Loop for Cooling High Heat Flux Dissipating ComponentsISROMEMSLiquid Cooling Loop | ISRO | 2.77 | Oct 2025 Sanctioned | In progress |
| 2 | Exploring the Effect of External Electric Field on Production of High-Quality Steam for Concentrated Solar Power GeneratorsSPARCElectric FieldSolar Steam Generation | SPARC | 4.72 | Jul 2023 Completed | 3 Q1 papers, 2 conference papers, 1 patent, 4 visits to National Taiwan University, 1 conference and 2 workshops |
| 3 | ANRF (SERB) CRG | 2.54 | Mar 2023 Completed | 4 Q1 papers, 1 conference paper, 2 patents granted | |
| 4 | Development of Up-Conversion Enhanced Efficient CPV System Integrated with Two-Phase Flow Assisted Heat SpreaderANRFSERB-SIREImperial College London | ANRF (SERB-SIRE) | 1.69 | Sep 2023 Completed | 1 Q1 paper, research visit to Imperial College London |
| 5 | Solar Driven Cogeneration of Electricity and Water in Small, Rural CommunitiesDSTIndo-South AfricaSolar Cogeneration | DST (Indo-South Africa) | 2.20 | Aug 2021 Completed | 1 Q1 paper, 1 patent granted, visit to Stellenbosch University |
| 6 | Development of Desalination System Using Selectively Patterned Solar AbsorberDoECCDesalinationPatterned Solar Absorber | DoECC, Kerala | 1.38 | Jul 2020 Completed | 2 Q1 papers, 1 patent granted |
| 7 | Heat Transfer Enhancement and Fluid Flow Analysis using Vertically Aligned CNT and Nanostructured SurfaceSERB-YSSCarbon NanotubesNanostructured Surface | SERB Young Scientist Scheme | 1.69 | Jul 2012 Completed | 4 Q1 papers |
MEMS Based Pumped Liquid Cooling Loop for Cooling High Heat Flux Dissipating Components
In progress
Exploring the Effect of External Electric Field on Production of High-Quality Steam for Concentrated Solar Power Generators
3 Q1 papers, 2 conference papers, 1 patent, 4 visits to National Taiwan University, 1 conference and 2 workshops
Design, fabrication and performance analysis of electro-assisted wickless heat spreader operating in a closed flow loop
4 Q1 papers, 1 conference paper, 2 patents granted
Development of Up-Conversion Enhanced Efficient CPV System Integrated with Two-Phase Flow Assisted Heat Spreader
1 Q1 paper, research visit to Imperial College London
Solar Driven Cogeneration of Electricity and Water in Small, Rural Communities
1 Q1 paper, 1 patent granted, visit to Stellenbosch University
Development of Desalination System Using Selectively Patterned Solar Absorber
2 Q1 papers, 1 patent granted
Heat Transfer Enhancement and Fluid Flow Analysis using Vertically Aligned CNT and Nanostructured Surface
4 Q1 papers
Commonwealth Scholarship (CBIE, Canada), “Heat Transfer Enhancement using Nano Structured Coatings”, CAD 10,000, 2012, 2 Q1 papers • NIT Calicut Faculty Research Grant, electro-assisted quenching of Ni-625 superalloy foams, ₹5 L, 2019–2021.
Laboratory Setups & Instruments
In-house boiling, quenching and desalination test rigs and precision laboratory instruments of the Two-Phase Heat Transfer Research Laboratory.
Pool Boiling Heat Transfer Setup
Custom experimental test rig for steady-state and transient pool boiling characterization, boiling curves, and critical heat flux (CHF) measurement.
Immersion Quenching Setup
Experimental immersion cooling setup to study rapid transient cooling, vapor film dynamics, and Leidenfrost effect suppression.
Interfacial Desalination Test Facility
Solar simulator and interfacial evaporation test facility for solar steam generation and multi-stage desalination systems.
Two-Phase Heat Spreader Closed Loop
Closed-loop test facility for wickless and electro-assisted heat spreaders under high-heat-flux dissipation conditions.
EHD-Assisted Pool Boiling Setup
Electrohydrodynamic (EHD) pool boiling test rig developed under the SPARC international collaborative project.
Electrodeposition Unit for Gr–Cu Composite Spreaders
Electrochemical deposition facility for synthesizing graphene–copper composite coatings and micro-structured thermal spreaders.
Data Acquisition System with LabVIEW (NI 9212)
National Instruments NI 9212 high-precision thermocouple input module integrated with LabVIEW for real-time multipoint temperature logging.
High-Temperature Tubular Furnace (1200 °C)
Precision tubular furnace reaching up to 1200 °C for controlled thermal annealing, coating synthesis, and specimen heat treatment.
DC Power Supply (100 W)
Regulated precision DC power supply for cartridge heater powering, electrodeposition experiments, and sensor excitation.
Simulation Workstation (HP Z2 G9)
High-performance HP Z2 G9 computational workstation equipped with Intel Core i9, NVIDIA RTX A4000 GPU, and 128 GB RAM for multiphase CFD and data modeling.
Principal Investigator
Laboratory Director, Research Lead & Academic Profile

Dr. Sujith Kumar C S
Associate ProfessorDepartment of Mechanical Engineering • National Institute of Technology Calicut
Lab: Two-Phase Heat Transfer Research Laboratory, Department of Mechanical Engineering, National Institute of Technology Calicut, Kerala 673601, India
Research Vision: The laboratory combines in-house boiling, quenching and desalination test rigs with high-speed imaging, infrared thermography, surface characterization and multiphase CFD to study phase-change heat transfer from the surface scale to the device scale.
Dr. Sujith Kumar C S is an Associate Professor in the Department of Mechanical Engineering at NIT Calicut, where he leads the Two-Phase Heat Transfer Research Laboratory. His research covers flow and pool boiling, surface engineering for phase-change heat transfer, immersion quenching, and solar-driven interfacial evaporation. He has published 42 SCI/SCIE journal articles, including 29 in Q1 journals, holds 5 Indian patents, and has led 7 sponsored projects worth ₹1.70 crore funded by ISRO, SPARC, ANRF (SERB), DST and the Kerala Directorate of Environment and Climate Change. He held a SERB-SIRE Fellowship at Imperial College London, a Commonwealth Scholarship at the University of Saskatchewan, and was a postdoctoral scientist at National Taiwan University.
Our People
Researchers, students and alumni who drive our experimental discoveries and scientific publications.
Interested in Joining Our Research Group?
We welcome applications from motivated Ph.D., Postdoctoral candidates, and M.Tech/B.Tech research interns with strong backgrounds in heat transfer.
Current Members
Active researchers and scholars currently in the lab
Rakesh A
Muhammed Haseeb E
Manu G
Shanker Krishnan
Nandakrishnan S L
Alumni & Former Members
Graduates and past researchers who contributed to our group
Dr. Inbaoli A
Dr. Ashish Chandran K
Dr. Johnsan R
Research Collaborators
Active international scientific collaborations across world-leading universities & national labs connected to NIT Calicut, India.
Patents & Publications
Granted patents and peer-reviewed SCI/SCIE journal articles from Dr. Sujith Kumar C. S. and research collaborators.
Patents
5 PatentsA Method for Alleviating Localised Hotspots on Electrically Floating Boiling Surfaces via Alternating Electrohydrodynamic Actuation
Multi-Stage Parallel Desalination System with Integrated Thermal Management for Waste Heat Recovery and Method Thereof
A System and Method for Solar Cavity Receiver Cooling Using Additive Geometric Functionalisation and Hydrogen Driven Bubble Dynamics
Journal Publications
38 PapersTransient pool boiling of water on copper tubes: An experimental analysis of transient heating, boiling hysteresis, and surface wettability
Experimental investigation on effects of surface texturing and surfactant on pool boiling performance of a vertically downward-faced copper surface
Performance evaluation of interfacial evaporation assisted solar still with patterned floating absorber and external reflectors
Book Chapters
4 ChaptersSuperhydrophobic coatings for pool boiling heat transfer applications
Two-Dimensional (2D) Layered Materials as Emerging Nanocatalysts in the Production of Biodiesel
Characterization of Surface Engineering and Coatings
Laboratory Gallery
Experimental rigs, high-speed shadowgraphy imaging, conference symposiums, and daily research milestones.

Delegates of ICFTES'24 at NIT Calicut with 287 participants, 4 plenaries, 20 keynotes, and over 250 research papers.

Dr. Sujith Kumar C S addressing the inaugural session with Prof. Ming-Chang Lu (NTU) and Prof. Lua Kim Boon (NYCU).

Participants and resource persons of the 5-day SPARC workshop with sessions by Prof. Lua Kim Boon and NITC faculty.
Ph.D. scholar Inbaoli A conducting transient pool boiling research at Prof. Ming-Chang Lu's Nano-Energy Laboratory, NTU.

Inauguration of the ISHMT-RCT Student Chapter at NIT Calicut by Dr. S. Sunil Kumar (President-Elect, ISHMT; former Deputy Director, LPSC–ISRO).

Prof. Ming-Chang Lu (National Taiwan University) with participants of the 18-hour lecture series on Microscale Heat Transfer, NIT Calicut.

Delegates of ICFTES'24 at NIT Calicut with 287 participants, 4 plenaries, 20 keynotes, and over 250 research papers.

Dr. Sujith Kumar C S addressing the inaugural session with Prof. Ming-Chang Lu (NTU) and Prof. Lua Kim Boon (NYCU).

Participants and resource persons of the 5-day SPARC workshop with sessions by Prof. Lua Kim Boon and NITC faculty.
Ph.D. scholar Inbaoli A conducting transient pool boiling research at Prof. Ming-Chang Lu's Nano-Energy Laboratory, NTU.

Inauguration of the ISHMT-RCT Student Chapter at NIT Calicut by Dr. S. Sunil Kumar (President-Elect, ISHMT; former Deputy Director, LPSC–ISRO).

Prof. Ming-Chang Lu (National Taiwan University) with participants of the 18-hour lecture series on Microscale Heat Transfer, NIT Calicut.